| sicelo | bq27200 question - IMIN: when does it become 0 after it has become 1? I can't figure this out from reading the datasheet (https://www.ti.com/lit/ds/symlink/bq27200.pdf , page 14). becoming 0 after a reset is clearly explained, but i want to know in normal conditions | 13:37 |
|---|---|---|
| sicelo | ah,i guess it's simple English ... it will change from 1 to 0 when reported battery voltage becomes less than the pre-programmed charge termination voltage (from the value of the register, this appears to be 4064mV for N900) | 18:44 |
| akossh | sicelo: I guess, this IMIN flag is set to 1, when the charging switches from the CC to the CV phase | 20:54 |
| sicelo | thanks. i was interested in the 1->0 transition | 21:00 |
| akossh | That one is not clear from the paragraph I read | 21:01 |
| sicelo | i think i understand it now :-) | 21:01 |
| sicelo | i'm charging up the device right now, to see if my conclusion agrees with reality | 21:03 |
| akossh | My guess is that it will become 0 when the battery starts discharging, or maybe, when the charging is completed | 21:03 |
Generated by irclog2html.py 2.17.0 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!